The tangential taping machine is a good system to tape big cables and flat cables.
The number of pads for each taping head is from two up to eight.
The taping machine can be used on stranding lines, insulation lines, screening or armouring lines or rewinding lines.
According the cable size and type is possible to choose different pay-off, take-up and pulling unit.
The rotation speed of the taping head is made by an AC motor installed on the main frame of the machine and the transmission is made with toothed pulleys and belt.
The tangential taping machines are made with different option according the number of tapes, the outer diameter and the hole of the pads, the type of the tape and the tension braking control of the tape.
The main characteristic is the type of tape:
Light tangential taping machine (ANTL): paper, polyester, Alluminium/Mylar, cotton, mica-glass
Heavy tangential taping machine (ANTH): light material plus steel and copper up to thicness 0,2mm
The tension braking control of the tape can be:
The brake system of the pad is made with a tape around a disc with dancer and spring, the operator can adjust the tension only when the machine is stopped.
The dancer will compensate the diameter changing
|Number of pads||2 / 4 / 6 / 8|
|Pads outer diameter||500 / 600 / 800mm|
|Pads hole diameter||76mm / 127mm|
|Max tape width||60mm / 75mm|
|Streingth control on tape||Manual brake with dancer|
|Tape material (ANTL)||Paper / Polyester / Alluminium/Mylar / Cotton / Mica-Glass|
|Tape material (ANTH)||Paper / Polyester / Alluminium/Mylar / Cotton / Mica-Glass / Steel and Copper up to 0,2mm|